SOLD OUT TO JAKARTA
USMC ILBE MARPAT DIGITAL PROPPER ARCTERYX PACK GEN II
NSN : 8465-01-515-8615
GENUINE US ISSUE GEN II ( SECOND GENERATION )
DESIGN BY FAMOUS ARCTERYX
MANUFACTURER : PROPPER INTERNATIONAL INC.
UK : 18" X 12" X 6 "
LOAD UP TO 40 POUNDS
TERDAPAT TEMPAT BUAT HYDRATION SYSTEM CAP 100 oz
KONDISI : SECOND ( LANGSUNG DARI USMC )
ADA SEDIKIT BAYANGAN (GB.6) BAGIAN BAWAH, NAMUN TERTUTUP SAMA BUCKLES YG BESAR (GB.4)
LABEL SESUAI GAMBAR
KONDISI ZIPPER , BUCKLE DAN ETC SEMUANYA BERFUNGSI DENGAN BAIK.
KESELURAHAN TAS INI SECARA UMUM TERMASUK GREAT CONDITION
BARANG DITERIMA SESUAI FOTO
BERIKUT URAIAN TENTANG TAS INI :
The Improved Load Bearing System (ILBE) backpack was created for use by the
United States Marine Corps based on feedback received during initial combat
situations that took place during the first US
involvement in Iraq.
The system was created by Arc’teryx’s Law Enforcement and Armed Forces (LEAF)
program and was intended to replace the ALICE and MOLLE systems currently in
use. Arc’teryx used the noted design flaws in the previous two systems to
create a more efficient load bearing pack without increasing the volume of the
pack and maneuverability it allowed for. The ILBE system consists of three main
parts, the Main Pack, the Hydration System, and the Assault Pack.
The Assault Pack on the ILBE system was designed to be the main ammunition
carrying portion of the ILBE system. It was also designed to contain a
Hydration System such as a Camelback Bladder, which is the third component of
the ILBE PACK
. Its standalone capacity is 1,500 inches of cubic space with a load
capacity of 25 to 40 pounds. It had two separate storage compartments as well
as an inner pocket. The inner pocket designed to house the *****
/ilbe/ilbe-hydration-system/" title="ILBE Hydration System">ILBE Hydration System can hold a bladder
containing up to 100 ounces of water.
ILBE Pack is made from
Cordura 725 fabric and is also imprinted with the same MARPAT (MARine PATtern)
as the other components of the ILBE. The standard measurements for an Assault
Pack were approximately 6″ deep, 12″ wide, and 18″ tall. They came equipped
with two quick release padded shoulder straps that were connected by a chest
strap as well as a 2″ wide waist belt with a quick release buckle. The Assault
Pack also had a removable plastic panel that provided extra stiffness when
needed as well as a back panel which was padded for extra comfort.
There are three main configurations for the ILBE system, the Existence Load,
the Approach March Load, and the Assault Configuration. Both the Assault
Configuration and Existence Load utilize the Assault Pack component. Since the
Approach March Load is designed more for extended survival than combat
situations, the Assault Pack was not required. Both the Existence Load and the
Assault Configuration are designed to be used in combat ready scenarios making
the Assault Pack an essential piece of the configuration.
The Assault Pack integrates perfectly with the Main Pack and the Hydration
System to create the complete ILBE system currently used by the Marine
Corps. The pack also has Pouch Attachment Ladder System (PALS)
equipment straps on the front and sides of the bag that allow for PALS
compatible accessories (also called MOLLE accessories).
ILBE Assault Backpack Details:
- Measures about 18″ tall x 12″
wide x 6″ thick
- Quick release padded shoulder
- Built in waist belt with
- Padded back panel
- Removable plastic stiffener
- Two storage compartments
- MOLLE attachment points
- Woodland MARPAT camo pattern
contact : joe 0818 970 079 / 021 3737 2727